Price: $29.95

"RegUtilities cleaned up my PC with a couple of simple steps. The process is SUPER easy and the results couldn't be better. Now my PC starts right up and doesn't show those annoying messages anymore. You have a life-long customer RegUtilities thanks."

Gina T.
Fort Dodge, IA

System Requirements:

Runs on Microsoft Windows 7, Windows Vista, Windows XP and 2000. Including 32-bit & 64-bit versions. Download size: 3.4 MB

Software Description:

RegUtilities will run a scan of your PC and identify all system errors , missing or corrupt system files. It also identifies errors in ActiveX/COM objects, Windows startups, File associations, File path references, Shared DLLs. To fix these errors, you can purchase a one year registration of RegUtilities software for only $29.95 subscription including all new versions, unlimited smart updates and customer support.

*Free trial is limited to startup customization, registry scanning, backup registry ,defragmenter tool , restore already backed up registry file. To access software full functionality is $29.95 USD subscription including all new versions, unlimited smart updates and customer support for 1 year.

XP Service Pack 3: Addressing Multiple XP Networking Problems

September 30th, 2011 Posted in Installer Error, Windows Update Comments Off on XP Service Pack 3: Addressing Multiple XP Networking Problems


One of the more welcomed advances with the Windows operating system XP was the enhanced ability to link computers up to a network. However, with all new advances came trouble and when the troubles began to mount up a service pack, like XP Service Pack 3 (SP3), was released to address the trouble.


What Is the XP Service Pack 3?

The XP Service Pack 3 is a special download that was put out by Microsoft in order to defuse multiple problems that were being found with the XP operating system. XP Service Pack 3 was the last service pack in a series of three that was released by Microsoft. Though it was not necessary to install the other two previous service packs, Microsoft does suggest at least installing XP Service Pack 1 (SP1) first. This allows for best results.


What Caused the Need for XP Service Pack 3?

As with any new program there are bound to be glitches. With Microsoft, they always want to ensure that their products are running as smoothly as possible. A lot of this can be handles with periodic updates, but when there is a lot that needs to be addressed a service pack represented an easier and more efficient way to go about this.


Installing XP Service Pack 3

If your computer is set to receive Windows Updates automatically, you may have already had XP Service Pack 3 downloaded. However, if your computer is running the XP operating system and it does not have the XP Service Pack 3 installed or your computer is on a network without it being installed, then you can still download the XP Service Pack 3 manually.


Solution 1: Manual Installation of XP Service Pack 3 for Individuals


  1. Turn on your computer.
  2. Go to Microsoft Updates page.
  3. On the right hand side of the page, you will see current status of your Automatic Updates.
  4. Ensure that the Automatic Updates is enabled.
  5. If it isn’t, click OK in the Automatic Updates window.
  6. Run an update.
    1. Click the Start Button on your desktop.
    2. Click ‘All Programs’.
    3. Click ‘Windows Update’.
    4. You will see a wizard with on screen instructions to follow.
    5. Click ‘Finish’ when prompted.
  7. Restart your computer.


Solution 2: Manual Installation of XP Service Pack 3 for IT Professionals.

  1. Go to
  2. Click the ‘Download’ button.
  3. Click Open or Run This Program Immediately.
  4. Follow Prompts.


These steps will help you ensure that the XP Service Pack 3 is properly installed on your computer or all the computers on your network. Good luck!

AddThis Social Bookmark Button

Solve a Printer Spooler Error these Simple Steps

September 28th, 2011 Posted in Installer Error, Windows Update Comments Off on Solve a Printer Spooler Error these Simple Steps


You may encounter a Printer Spooler error when attempting to print a large amount of content, or you print often. This error will cause the printer to either take a very long time to print or simply become unresponsive. Here are some solutions to fix this frustrating problem.


What Causes the Printer Spooler Error?

A Printer Spooler Error is caused by a variety of problems. It can be due to simple errors with in the service itself, or corrupted as time goes on. It can also experience problems due to other services conflicting with its use such as independent print spool services created by the printer manufacturer. These can be used in conflict with existing services provided by Windows.


How to Fix the Printer Spooler Error

Fixing a Printer Spooler error can be done by following a few basic steps. If this manual correction is not affective there may be a problem with a spooler service from a third party service provided by the printer you installed. Uninstalling this software may also be an adequate fix.


Solution 1: Manually correcting the Printer Spooler Error


  1. Log onto your computer as the administrator.
  2. Click the Start tab
  3. Click Run and then in the Open box type services.msc and press enter.
  4. In the new Services window that will open look for all services that are named or are described in some way as Printer Spooler. If you have a printer with an independent spooler program then there will be one of these in the list in addition to the generic Windows print spooler.
  5. Select the Print Spooler service and then from the menu select Stop.
  6. Do not close the Services window, but instead minimize it and double-click My Computer from the Desktop. Move your way through the folders in C: to c:\windows\system32\spool\printers and without deleting the actual folder delete everything with in the PRINTERS folder itself.
  7. Close this window and now maximize the Services window. Locate the Print Spool service again, and now from the menu click the Start option. This should correct the problem and print a test page to verify. If this does not correct the problem then you may need to uninstall other printer management programs.


Solution 2: Uninstalling conflicting software


  1. Begin by finding the Disk that was included with your printer.
  2. Click the Start tab
  3. Select the Control Panel and then click Add or Remove Programs
  4. From there select Uninstall a program
  5. Search through the list of programs that are presented and locate the printer program that is associated with the brand of your printer.
  6. Click the program and then the Change/Remove/Uninstall option.
  7. Follow the instructions until the removal is complete and then close the window.
  8. Using the Disk that came with your printer insert the disk in your drive and follow the installation instructions that appear on the screen.
  9. Print a test page


Thank you for visiting our site and I sincerely hope this has corrected your Printer Spooler error. Good luck and let me know if this did not correct the problem or if you need further help with this or anything else.

AddThis Social Bookmark Button

Solve a Run Time Error with these Simple Steps

September 24th, 2011 Posted in Installer Error, Windows Update Comments Off on Solve a Run Time Error with these Simple Steps


There is little more frustrating then running a program that suddenly stops and a popup box appears stating that there has been a Run Time Error. Although this is aggravating at the time, there is a fix.


What Causes the Run Time Error?

A Runtime is a library of code that is filled with information from programs as they are currently running. If something causes the information within the library to no longer be available or for that data to become corrupted then the software utilizing this information will be unstable and crash.


How to Fix the Run Time Error

More often then not a Run Time Error will take place from software errors such as when an application has tried to accomplish a task correctly but has failed to do so. This can occur if the software has not received regular updates, or it can be the result of toolbars that are creating conflicting errors.


Solution: Removing disruptive toolbars


  1. Log onto your computer as the administrator.
  2. Click the Start tab
  3. Select the Control panel and then the Add or Remove Programs link
  4. From the list of programs presented scan through them for those related to toolbars installed
  5. Click the program once and then select the Change/Remove/Uninstall link
  6. Once this is complete continue to remove the toolbars that you are not wanting. This has been reported as being a large help to users experiencing Run Time Errors that are using a browser


Thank you for visiting this site and please let me know if this was of help, or if you need further assistance. I hope that this has corrected your Run Time Error and good luck.

AddThis Social Bookmark Button

Solve a Shell32.dll Error with These Simple Steps

September 23rd, 2011 Posted in Dll Errors, Installer Error, Windows Update Comments Off on Solve a Shell32.dll Error with These Simple Steps


One of the innovations utilized in crafting Windows is the implementation of something referred to as a shared library. A Dynamic-link library, or DLL, is a resource that Windows uses for applications to work properly. These libraries grant a method and means for shared data and code and allows this information to be reused with out having to re-compile or re-link it each time. It is essential that this system works properly and when there is a problem with the way a DLL is handled then this can crate an issue. Although this can be concerning, there is a way to fix this problem by manually correcting it.


What Causes a Shell32.dll Error?

When confronted with the Shell32.dll error is important to know that it is often caused when the DLL was in use and was handled improperly. This causes the data to eventually become corrupt, missing or incomplete.


How to Fix a Shell32.dll Error

When the DLL has an incomplete value in its registry then there will need to be a manual fix. This can be done by going into the registry and addressing the incorrect data.


Solution: Manually correcting the Shell32.dll


  1. To begin correcting the shell32.dll error you will first need to log onto your computer as the administrator.
  2. Next select the Start tab located on your computers desktop
  3. Following this you will need to select Run and when prompted to by the opening dialog box type the command regedit
  4. Now press enter
  5. With the information that is displayed you will now need to find your way to the registry key labled: HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main
  6. Now you will need to export the key to a new folder that you will create on your desktop. This will be done in precaution to ensure that if any mistakes are made you can have a back up.
  7. From the desktop right-click and select new
  8. Now select the Folder option and when the item is created double-click it to open
  9. Once you have exported the key to the new folder, delete the value in the Search Bar with in the Main Key.


    Thank you and I appreciate you visiting this site. Let me know if this information was of help, or if you need further assistance with Shell32.dll errors. I hope that this has corrected your problem and good luck.

    AddThis Social Bookmark Button

    Fixing Your Computer When It Says Not Enough Memory

    September 21st, 2011 Posted in Installer Error, PC Performance, Windows Update Comments Off on Fixing Your Computer When It Says Not Enough Memory


    Computer users occasionally come across a message of not enough memory as they are attempting to save something or use a specific kind of application. Knowing how to deal with it will help eliminate frustration.


    What is Not Enough Memory?

    Not Enough Memory is an error message that users typically receive when attempting to use particular software or external hardware that demands more memory than the system is currently able to furnish.


    What Causes Not Enough Memory?

    There are a variety of things that can cause a computer to have not enough memory. There can actually be a problem with the memory card of your computer. However, typically the problem is that temporary files may be taking up too much space on your hard drive because the RAM or Random Access Memory is depleted as you open more and more applications.


    How to Fix Not Enough Memory

    Despite the fact that there are multiple possible causes for the “not enough memory” error, there are a limited number of ways to resolve the issue. Follow the steps below to figure it out and get the solution you need.



    1. If you received a second message in addition to your not enough memory message, follow instructions for correcting the second message. This usually takes care of the not enough memory error also.
    2. Go to the Start button and shut down your computer. Let it sit for a few minutes before restarting it.
    3. When your computer restarts, attempt the same action you received the error message with again. This is often enough to free up the necessary memory.
    4. Ensure that the computer you are using has sufficient RAM to handle the application you are attempting.
    5. Click on Task Manager and select the tab marked Performance to find out how much memory is being utilized and how it is used over time in a graph form.
    6. If you have insufficient memory still, choose to cleanup your temporary files, by clicking on Start.
    7. Opt for Programs; then Accessories; then SystemTools and finally DiskCleanup.
    8. Specify the appropriate hard disks you want cleaned and click OK.
    9. You may also need to remove old software that is outdated or unused. Do this by once again going to the Start button.
    10. Click on Settings; then Control Panel and then Add/Remove.
    11. A final way to free up memory is to empty your Recycle Bin on your desktop. Simply double-click on the icon; choose File and then Empty Recycle Bin. You will need to confirm your intention by answering Yes to the question.
    12. Finally shut down your computer again and start it back up before attempting the original application that caused your error.
    13. If the problem has not been resolved you may need to contact a computer technician for a new memory card.


    Hope this helps solve your “not enough memory” error and gets your computer running smoothly once again.

    AddThis Social Bookmark Button

    Solve the Scan Error 1706 with these Simple Steps

    September 20th, 2011 Posted in Installer Error, Windows Update Comments Off on Solve the Scan Error 1706 with these Simple Steps


    When you are adding programs to your arsenal of tools you want to be able to load them onto your computer and run them not only with out any difficulty but also with out there being lasting negative effects. However, there may be a time when you are installing a program and suddenly you get a message that reads: Scan Error – 1706: No Valid source could be found for product. This can be extremely frustrating and although you many not at first understand why this has occurred there are some solutions that may correct this aggravating problem.


    What Causes a Scan Error 1706?

    If you are attempting to load a program on to your computer and get an Scan Error 1706 message it can actually be caused by something relatively simple. This error code can be the result of using InstallShield, and while Windows is attempting to run the setup portion of the installation the original MSI package is stored improperly. When this type of error occurs you will get the error 1706 message.


    How to Fix a Scan Error 1706

    It is possible to correct this problem but you will have to address it by troubleshooting this error. In systematically ruling out a series of possible problems you can eliminate potential reasons this has occurred if you follow these basic steps.


    Solution: Troubleshooting a scan error 1706 message


    1. To begin troubleshooting the scan error 1706 message you will need to make sure that you are first logged in to your computer as the administrator
    2. As you assess potential reasons this error has occurred it is important to note that if you are installing the desired program via the internet, and if you are given a prompt to browse to MSI package, then be certain that you double-click the Setup.exe file. This information will ensure that the MSI package will be looked for in the right location.
    3. If you are instead installing the program over a network then you will need to be certain that you have installed the latest available version of InstallShield. It is possible that an older version of this beneficial program may ultimately be causing the problem.
    4. Finally if the setup installation is unable to find the files required then you may need to locate them yourself. This can be done by doing a search on your C: drive and then provide the correct location to the installer.


    Thank you and I appreciate you for visiting this site. Let me know if this information was helpful in correcting your scan error 1706. Let me know you need further assistance, or if this was helpful and I hope that this has corrected the problem. Good luck.

    AddThis Social Bookmark Button

    MYOB Error 3000: Solutions that let you ‘Mind Your Own Business’ Again

    September 18th, 2011 Posted in Computer Errors, Installer Error, Internet Error Comments Off on MYOB Error 3000: Solutions that let you ‘Mind Your Own Business’ Again


    MYOB (Mind Your Own Business) is an Australian software company that provides small and midsized businesses with accounting, payroll, web hosting, and other retail services. One of the more common errors to occur with MYOB is the dreaded MYOB Error 3000.


    What is MYOB Error 3000?

    A MYOB Error 3000 is an error that will occur when you are simply trying to utilize the software in a normal fashion. This can make it hard, if not impossible, for you to complete the task you are attempting and if left alone, the error usually gets worse and intensifies.


    What Causes MYOB Error 3000?

    The MYOB Error 3000 is an error that is typically associated with an abrupt or sudden exit to the program while a record was in the process of being written. Another possible culprit could be a file or files on your computer’s registry that are corrupt leaving the program to have pathways that are bad and therefore fail.


    How to Fix MYOB Error 3000

    When you go about fixing your MYOB Error 3000 you can do so by conducing the company’s recommended fixes or you can try to take your computer back in time before there was a problem. If one solution doesn’t work for you, the other might, so you will want to give all solutions a fair shake.


    Solution 1: Optimise (spelled with an ‘s’ as opposed to ‘z’) with the MYOB Optimisation Assistant


    1. Open your MYOB company file.
    2. Go to File Menu.
    3. Choose ‘Optimise Company File.’
    4. Wait while optimisation takes place.
    5. Restart your computer.


    Solution 2: Verify Your MYOB Company File


    1. Ensure all other users are signed out if working with a network.
    2. Open your MYOB company file.
    3. Go to File Menu.
    4. Choose ‘Verify Company File.’
    5. Wait for configuration window to open.
    6. Click OK.
    7. Wait for verification scan.
    8. View errors report and click OK.
    9. Restart your computer.


    Solution 3: Do a System Restore Back


    1. Start your computer in Safe Mode by pressing the F8 key while your computer is in the process of turning on.
    2. In Safe Mode, click the start button.
    3. Select Control Panel.
    4. Select System.
    5. Go to System Protection tab.
    6. Select System Restore.
    7. Click Apply.
    8. Click OK.
    9. Restart your computer to take it back to a restore point before the error occurred.


    For best results, attempt the first two solutions in order, then move on to the third if not successful with your MYOB Error 3000 fix. Good luck!

    AddThis Social Bookmark Button

    Steps to Repairing NTDLL.DLL Errors for Your Computer

    September 17th, 2011 Posted in Computer Boot Error, Dll Errors, Installer Error, Internet Error, Windows Update Comments Off on Steps to Repairing NTDLL.DLL Errors for Your Computer


    What Is a NTDLL.DLL Error?

    If your computer is running slower than usual, or having issues when certain programs are in use, such as Internet Explorer, then you might receive a NTDLL.DLL error message. Depending on the reason for the error, it can appear and pop up with a variety of error messages, including: Crash caused in ntdll.dll!; Unhandled exception at [address] (NTDLL.DLL); [program] caused a fault in module NTDLL.DLL at [address]; NTDLL.DLL error!; STOP: 0xC0000221 unknown hard error C:\Winnt\System32\Ntdll.dll.


    What Causes a NTDLL.DLL Error?

    A NTDLL.DLL error might be caused by a variety of reasons, including some of the most common being a damaged or corrupt version of the NTDLL.DLL file, in addition to problems arising between various programs and Windows, and issues with hardware drivers that might be corrupt.


    How to Fix a NTDLL.DLL Error

    There are some different options to repair NTDLL.DLL errors, depending on the root cause of the issue. Try the following solutions, starting with Solution 1, and then moving on to Solution 2 or 3 depending on which solution best fits your needs.


    Solution 1: Determine if the error is a temporary, isolated, one-time issue.


    1. Restart your computer.
    2. Run the program you were using when the NTDLL.DLL error occurred to see if you still receive the error message.


    Solution 2: Reinstall the program for which the NTDLL.DLL error is occurring.

    1. If you know the error is always caused when opening a certain program on your computer, uninstall the program.
    2. Download and reinstall the program.
    3. Restart your computer.
    4. Run the program to see if the NTDLL.DLL error still occurs.


    Solution 3: Disable Add-ons for Internet Explorer


    1. Identify if the NTDLL.DLL error is occurring when you run, close or start Internet Explorer. If it is, then proceed to Step 2.
    2. Open Internet Explorer.
    3. From the Menu bar, select Tools.
    4. Select Manage Add-ons.
    5. Select Enable or Disable Add-ons.
    6. Select Add-ons that have been used by Internet Explorer from the Manage Add-ons window.
    7. Choose the first add-on listed.
    8. In the Settings section of the window, click Disabled.
    9. Click OK.
    10. Restart Internet Explorer.
    11. Determine if the NTDLL.DLL is resolved.
    12. If it’s not, repeat Steps 2 through 11 while disabling an additional add on with each run through of the steps. Once you no longer receive the NTDLL.DLL error, you’ll have identified the add-on that was causing the issue.


    One of these solutions should resolve a NTDLL.DLL Error for a faster and better running computer. Please let me know if I can be of further assistance to answer additional questions about this error. Good luck to you!

    AddThis Social Bookmark Button

    Solve a Missing Toolbar with these Simple Steps

    September 16th, 2011 Posted in Computer Errors, Installer Error Comments Off on Solve a Missing Toolbar with these Simple Steps


    There may be times when you are using Windows Internet Explorer and suddenly find that the toolbar or menu bar is missing. This can be very frustrating and stand in the way of productivity. There are some simple steps that can be taken to correct this problem.


    What Causes a Missing Toolbar?

    Depending upon the version of Internet Explorer you are using there can be a couple of reasons why this is happening. There can be internal software issues that require a manual fix with your registry, or it could be that the autohide option of the taskbar is checked.


    How to Fix the Missing Toolbar

    Modifying your registry can fix a missing toolbar, however it is important to note that care should be taken when performing this task. If the registry is modified incorrectly then a serious problem can affect your computer. It is a good idea to make a backup of any file you are deleting just in case you need to restore it.


    Solution: Manually modifying your registry


    1. Log onto your computer as the administrator.
    2. Shut down IE and any open windows
    3. Select the Start icon on the desktop and then Run
    4. Type regedit in the dialog box and press OK
    5. In the registry find the subkey HKY_CURRENT_USER\Software\Microsoft\Internet Explorer\Toolbar
    6. In the Details tab find Explorer and click it to open. Then locate ITBarLayout and right-click. Select Delete.
    7. Then select the WebBrowser subkey and click to open it.
    8. In Details find the ITBarLayout and right-click. Select Delete
    9. Click Exit in the File menu


    Thank you for visiting this site. Let me know if this information was of help, or if you need further assistance. I hope that this has corrected your Missing Toolbar and good luck.

    AddThis Social Bookmark Button

    JIT Debugger Fix: A Solution that Comes ‘Just-In-Time’

    September 15th, 2011 Posted in Installer Error, Internet Error, Windows Update Comments Off on JIT Debugger Fix: A Solution that Comes ‘Just-In-Time’


    If you are a user of Visual Studio then you may find that you are in the need of a JIT Debugger fix. While the process is one that will require some time, it is one that you will want to undertake to get your debugger working once more.


    What is a JIT Debugger Fix?

    The JIT in JIT Debugger stands for Just-In-Time and is a program that automatically launches with Visual Studio. When there is an error outside the program the debugger will automatically launch (pop up) and give you the option of checking the error out or letting a fatal error occur. So, when you require a JIT Debugger fix you require a fix for a fixing application.


    What Causes the Need for a JIT Debugger Fix?

    You may require a JIT Debugger fix if you recently installed another program that also has a debugging application. The competing programs may be overlapping in some files and/or extensions causing you to see an error that might read as though you don’t have your JIT Debugger installed. Another possible cause may be a virus that your computer has contracted.


    How to Conduct a JIT Debugger Fix

    When attempting a JIT Debugger fix you can go at it a couple of different ways. The solution that works for you will depend on what is actually causing your JIT Debugger problem. However, you can simply start with the basic solution and move on to the more advanced one if you are still experiencing problems.


    Solution 1: Complete a Virus Scan


    1. Locate the anti-virus icon on your desktop.
    2. Double click the anti-virus icon to open the program.
    3. Find scanning options and choose the ‘Full System Scan’ option.
    4. Run a complete full system scan.
    5. If any viruses are found, delete them immediately.
    6. Restart your computer to allow changes to take effect.
    7. Check for recurrences of error.


    Solution 2: Ensure JIT Debugger is Default Debugger


    1. Click the start button on your computer.
    2. Click on Tools.
    3. Click on Options.
    4. From the Options Dialog box select your Debugging Folder.
    5. From your Debugging Folder be sure to highlight and select JIT Debugger.
    6. Either clean or select the pertinent program types that are labeled Script, Managed, and/or Native.
    7. Click OK.
    8. Restart your computer.


    **It should be noted that you may need to login as an administrator for the registry key to change with this solution. This will depend on your Windows operating system.

    This fix should help you complete your JIT Debugger fix. Good luck!

    AddThis Social Bookmark Button