Blue screen repair is something almost every computer owner will face at one time or another. While known by some as the blue screen of death, repairing a blue screen error is often much easier than it seems.

What is Blue Screen Repair?

Blue screen repair is needed if you encounter errors that shut down your Microsoft Windows operating system or cause it to restart without notice. These are also referred to as STOP errors. Essentially you have a bright blue screen with the disconcerting message “beginning of physical memory dump.”

What Causes You To Need Blue Screen Repair?

Blue screen errors occur when there is a software or hardware problem that is unrecoverable. Essentially the system shuts down in order to avoid your computer being damaged. Typically the issue is one to do with memory, such as a memory allocation error, DLL error, COM error or RAM problems. However, there are a variety of things that can actually cause blue screen errors.

How to Do Blue Screen Repair?

Blue screen repairs always start with the screen itself. The blue screen that you see is providing you with information you need. What you see are printed there are diagnostic messages.

Solution

Steps:

1. When you encounter the scary blue screen, immediately shut down your computer and wait a few minutes before turning it back on. This will minimize memory loss.
2. Once you restart the computer, begin by reading the diagnostic messages on the screen. Look for the code you see on the blue screen on a list of Windows bugcheck codes. You can find it here: http://msdn.microsoft.com/en-us/library/ff542347(v=vs.85).aspx. This extensive list provides detailed information on dealing with each type of error code.
3. If you are still encountering blue screen errors, analyze any recent changes you have made in the settings of your computer. They are likely the cause. Click on the Start button on the bottom left of the screen.
4. Choose Settings.
5. Select Control Panel.
6. Click on Add or Remove Programs.
7. At that window, undo anything you have recently done to test for the cause of your blue screen error.
8. Following any adding or removing Windows components or programs, always shut down and restart your computer.
9. If the problem persists, remove any external hardware devices and attempt regular use of your computer to see if incompatible hardware is causing the problem.

If you have used these remedies to do your blue screen repair but the problem is not solved, your issue is likely a hardware problem that requires a professional computer technician. Good luck with your blue screen repairs.

A Bad Pool Caller is an error message that typically results from computer memory management problems. The error is delivered via a blue screen as the computer is booting up and Windows shuts down to avoid computer damages. Following shut-down the computer may reboot, but will continue the cycle of putting up the Bad Pool Caller blue screen and shutting down again. There are three different solutions you can try to repair the issue.

What Causes the Bad Pool Caller Error?

In most cases, the Bad Pool Caller error occurs when new computer hardware or software has been installed or following updates. The cause may be a malfunctioning hardware or software, disconnected devices, or it may be a memory chip that is defective or your computer’s incompatibility with the installed products.

How to Fix the Bad Pool Caller Error

The Bad Pool Caller error can disrupt your computer activity, may cause you to lose important information and can cause damage to your computer. In order to get past the dreaded blue screen, the user must perform the required steps and solve the Bad Pool Caller issue immediately. There are three solutions to try to remedy the problem.

Solution 1: Determine Whether or Not Computer Hardware is Working Correctly

Steps:

1. Turn off PC.
2. Check all cables coming to and from the computer to ensure they are connected and attached securely.
3. Detach and then plug in again all cords and devices.
4. Restart computer to determine if this solved the Bad Pool Caller error.

Solution 2: Uninstall and Reinstall Malfunctioning Software

Steps:

1. Close all open windows on your computer.
2. Click the Start button.
3. Select “Control Panel.”
4. Click on “Add/Remove Programs”
5. Follow prompt to remove problematic software program.
6. Restart your computer.
7. Reinstall the file installer for the program you wish to reinstall.

Solution 3: Perform a System Restore to Fix Bad Pool Caller Error

Steps:

1. Turn on the computer and log-on as administrator.
2. Click the Start button the computer and choose “All Programs.”
3. Select “Accessories.”
4. Select “System.”
5. Select “System Restore.”
6. A new screen will appear, select “Restore my personal computer to an earlier period.”
7. Click “Next.”
8. Select the most recent restore date listed from the “Select a Restore Point” list.
9. Click “Next.”
10. Select “Next” again in the window for confirmation.
11. Reboot you computer when restoration is complete.

Thank you for visiting our site to get the computer assistance you need. I hope this helped you to fix the Bad Pool Caller error you were experiencing. Good luck, and please let me know if you need additional help.